Model MSIW60D Heavy-Duty, Dual Cylinder, Completely Integrated Ironworker with 60 Ton Capacity, 7-1/2 HP, 10” Throat, 5 Work Stations, and Simultaneous Dual Operation
PUNCHING – Punch Pressure: 60 Tons;
Punch Holder and Jog Mode;
Punch Work Table: Includes Backgauge and Adjustable Stops;
Adjustable See-Through Punch Stripper:
For Fast and Easy Setup;
Die Holder: Adjustable in Machined T-slots for Quick Punch and Die Alignment;
Standard Tooling: 4” in 3/16” Material;
CPD Series: 26 Punch and 62 Die;
Large Tooling: 2” in 3/8″;
CPD Series: SP51P Punch and SP80D Die;
Optional Oversize Tooling: 4” in 3/16” Material;
Throat Depth: 10”; Stroke Length: 2-5/16”;
Cycles per Minute in 3/4”: 25; Punching Station Work Height: 40-9/16”;
BAR SHEARING – Round Bar Maximum Capacity: 1-1/2”;
Square Bar Maximum Capacity: 1-1/2” x 1-1/2”;
Six Cavity Round and Square Bar Shear Sizes: Round 1/2”, 1”, 1-1/2” and Square – 3/4”, 1-1/2”;
Channel Shear Maximum (Optional): 4”;
I-Beam Shear Maximum (Optional): 4”;
Bar Shear Work Height: 44-1/2”;
FLAT BAR SHEARING – Flat Bar Shear Capacity: 12” in 1/2”;
Maximum Width x Thickness: 8” in 3/4”;
Lower Blade: Four (4) Usable Edges;
Support Table: Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right;
Adjustable Hold-Down: Holds work piece securely in position when shearing;
Upper Shear Blade: Provides for minimum distortion, Two (2) usable edges;
Blade Length: 12-1/2”;
Angle Flange Trim: 3”;
Flat Bar Shear Work Height: 35-3/4”;
ANGLE SHEARING – Maximum Capacity – 90 Degrees: 4” x 4 x 3/8”;
Maximum Capacity – 45 degrees: 2-1/2” x 2-1/2 ” x 3/8”;
Shearing with no material loss and minimum deformity;
Shear Blades: Four (4) Usable Edges;
Angle Shear Work Height: 44-1/2”;
NOTCHING – Rectangular Notcher: 1-3/4” x 3-1/2” x 3/8”;
Electrical Interlock Safety Guard; Gauge Table with Stops: For precise positioning;
Notcher Work Height: 35-1/2”;
OTHER STANDARD EQUIPMENT – Five (5) Sets of Punches and Dies: Punches 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16” and Dies 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”;
CPD Series: 26 Punch and 62 Die; Magnetic Base Work Light;
Adjustable Electric Back Gauge (36”); 2
4 Volt DC Control Voltage;
Scrap Boxes at Punching and Notching Stations;
Adjustable Stroke Depth at Punch;
Two (2) Full-Control Foot Pedals;
Two (2) Hole Die Holders;
Two (2) Piece Gauging Table at Punch Station;
Keyed Punch Holder for Shaped Tooling;
Machine Net Weight: 3,350 Lbs.;
Machine Dimensions: 60” x 39” x 74”, Electric Backgauge: 3’;
Wired: 230/3
Please feel free to reach us to get more information about this product.
